HP-SN-IP-VRRP-MIB DEFINITIONS ::= BEGIN


-- Foundry SnRouter Group MIB Release 1.0.0
-- Revision 0 1/7/97
-- Revision 1 6/5/02
-- Revision 2 08/10/02

-- Copyright 1996-97 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry Networks SNMP Management Information Base 
-- Specification embodies Foundry Networks' confidential and
-- proprietary intellectual property. Foundry Networks retains all
-- title and ownership in the Specification, including any
-- revisions.

-- This Specification is supplied "AS IS," and Foundry Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.

-- SECTION 1: Top Level Definitions

-- Imports

IMPORTS
	IpAddress, Counter
		FROM RFC1155-SMI
	OBJECT-TYPE             
		FROM RFC-1212
	ifIndex FROM IF-MIB
		
    snVrrp FROM HP-SN-ROOT-MIB ;

	MacAddress ::=
	      OCTET STRING (SIZE(6))
	  -- This data type is used to model media addresses.  For many
	  -- types of media, this will be in a binary representation.
	  -- For example, an ethernet address would be represented as
	  -- a string of 6 octets.

snVrrpGlobal 	OBJECT IDENTIFIER ::= { snVrrp 1 }
snVrrpIntf 		OBJECT IDENTIFIER ::= { snVrrp 2 }
snVrrpVirRtr 	OBJECT IDENTIFIER ::= { snVrrp 3 }
snVrrpIntf2 	OBJECT IDENTIFIER ::= { snVrrp 4 }
snVrrpVirRtr2 	OBJECT IDENTIFIER ::= { snVrrp 5 }


-- VRRP and VRRP-Extended MIBs

--  Section 1:	VRRP Global Variables

snVrrpGroupOperMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),             
		enabled(1)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The VRRP is configured on this system
		 either enabled or disabled and the
		 default is disabled mode.
		 disabled(0)..........disable VRRP   
		 enabled(1)...........activate VRRP"
	::= { snVrrpGlobal 1 }

snVrrpIfStateChangeTrap OBJECT-TYPE
	SYNTAX	INTEGER { disabled(0), enabled(1) }
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Indicates whether the SNMP agent process is
		permitted to generate vrrp and vrrpe interface state change
		traps."
    DEFVAL { enabled }
	::= { snVrrpGlobal 2 }

snVrrpIfMaxNumVridPerIntf OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"Indicates the maximum number of VRID per interface."
	::= { snVrrpGlobal 3 }

snVrrpIfMaxNumVridPerSystem OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"Indicates the maximum number of VRID per system."
	::= { snVrrpGlobal 4 }

snVrrpClearVrrpStat OBJECT-TYPE
	SYNTAX	INTEGER { normal(0), clear(1) }
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Clear VRRP statistics command."
	::= { snVrrpGlobal 5 }

snVrrpGroupOperModeVrrpextended OBJECT-TYPE 
    SYNTAX  INTEGER {   disabled(0), enabled(1) }
    ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION "The VRRP_extended is configured on this system either enabled 
        or disabled and the default is disabled mode.
		 disabled(0)..........disable VRRP extended   
		 enabled(1)...........activate VRRP extended" 
	::= { snVrrpGlobal 6 }
	

--  Section 2:	VRRP Interface Table
--  The following table is deprecated by snVrrpIf2Table, which is 
--  ifIndex based table

snVrrpIfTable OBJECT-TYPE
    SYNTAX   SEQUENCE OF SnVrrpIfEntry
    ACCESS   not-accessible
    STATUS   deprecated
    DESCRIPTION
       "The VRRP Interface Table describes the interfaces from
        the viewpoint of VRRP."
    ::= { snVrrpIntf 1 }

     snVrrpIfEntry OBJECT-TYPE
         SYNTAX   SnVrrpIfEntry
         ACCESS   not-accessible
         STATUS   deprecated
         DESCRIPTION
            "The VRRP Interface Entry describes one interface from
            the viewpoint of VRRP."
         INDEX { snVrrpIfPort }
         ::= { snVrrpIfTable 1 }

     SnVrrpIfEntry ::=
         SEQUENCE {
             snVrrpIfPort
			     INTEGER,
             snVrrpIfAuthType
			     INTEGER,
			 snVrrpIfAuthPassword
			     OCTET STRING,
             snVrrpIfRxHeaderErrCnts
			     Counter,
             snVrrpIfRxAuthTypeErrCnts
			     Counter,
             snVrrpIfRxAuthPwdMismatchErrCnts
			     Counter,
             snVrrpIfRxVridErrCnts
			     Counter
         }


    snVrrpIfPort OBJECT-TYPE
         SYNTAX   INTEGER
         ACCESS   read-only
         STATUS   deprecated
         DESCRIPTION
            "The IP port of this VRRP interface."
         ::= { snVrrpIfEntry 1 }

    snVrrpIfAuthType OBJECT-TYPE
         SYNTAX   INTEGER { 
         				noAuth(0), 
         				simpleTextPasswd(1), 
						ipAuthHeader(2)
						}
         ACCESS   read-write
         STATUS   deprecated
         DESCRIPTION
            "The authentication type of this interface."
         ::= { snVrrpIfEntry 2 }

    snVrrpIfAuthPassword OBJECT-TYPE
		 SYNTAX	  OCTET STRING (SIZE (0..8))
         ACCESS   read-write
         STATUS   deprecated
         DESCRIPTION
            "The simple text password is allowed if only if 
            the snVrrpIfAuthType type is simpleTextPasswd(1)."
         ::= { snVrrpIfEntry 3 }

    snVrrpIfRxHeaderErrCnts OBJECT-TYPE
         SYNTAX   Counter
         ACCESS   read-only
         STATUS   deprecated
         DESCRIPTION
            "The received Header error counts in this interface."
         ::= { snVrrpIfEntry 4 }

    snVrrpIfRxAuthTypeErrCnts OBJECT-TYPE
         SYNTAX   Counter
         ACCESS   read-only
         STATUS   deprecated
         DESCRIPTION
            "The received authentication type error counts in this interface."
         ::= { snVrrpIfEntry 5 }

    snVrrpIfRxAuthPwdMismatchErrCnts OBJECT-TYPE
         SYNTAX   Counter
         ACCESS   read-only
         STATUS   deprecated
         DESCRIPTION
            "The received authentication password mismatched error counts in this interface."
         ::= { snVrrpIfEntry 6 }

    snVrrpIfRxVridErrCnts OBJECT-TYPE
         SYNTAX   Counter
         ACCESS   read-only
         STATUS   deprecated
         DESCRIPTION
            "The received unfound VRID error counts in this interface."
         ::= { snVrrpIfEntry 7 }

--  Section 3:	VRRP and VRRP-Extended Interface Table, 
--              this is a modified vrrp/vrrpe interface table with ifIndex.
--              NOTE: Protocols VRRPE and VRRP-Extended are one and the same.

snVrrpIf2Table OBJECT-TYPE
    SYNTAX   SEQUENCE OF SnVrrpIf2Entry
    ACCESS   not-accessible
    STATUS   mandatory
    DESCRIPTION
       "The VRRP and VRRPE Interface Table describes the interfaces from
        the viewpoint of VRRP and VRRPE."
    ::= { snVrrpIntf2 1 }

     snVrrpIf2Entry OBJECT-TYPE
         SYNTAX   SnVrrpIf2Entry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "The VRRP and VRRPE Interface Entry describes one interface from
            the viewpoint of VRRP and VRRPE."
         INDEX { ifIndex}
         ::= { snVrrpIf2Table 1 }

     SnVrrpIf2Entry ::=
         SEQUENCE {
             snVrrpIf2AuthType
			     INTEGER,
			 snVrrpIf2AuthPassword
			     OCTET STRING,
             snVrrpIf2RxHeaderErrCnts
			     Counter,
             snVrrpIf2RxAuthTypeErrCnts
			     Counter,
             snVrrpIf2RxAuthPwdMismatchErrCnts
			     Counter,
             snVrrpIf2RxVridErrCnts
			     Counter
         }

    snVrrpIf2AuthType OBJECT-TYPE
         SYNTAX   INTEGER { 
         				noAuth(0), 
         				simpleTextPasswd(1), 
						ipAuthHeader(2)
						}
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The authentication type of this interface."
         ::= { snVrrpIf2Entry 1 }

    snVrrpIf2AuthPassword OBJECT-TYPE
		 SYNTAX	  OCTET STRING (SIZE (0..8))
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The simple text password is allowed if only if 
            the snVrrpIf2AuthType type is simpleTextPasswd(1)."
         ::= { snVrrpIf2Entry 2 }

    snVrrpIf2RxHeaderErrCnts OBJECT-TYPE
         SYNTAX   Counter
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The received Header error counts in this interface."
         ::= { snVrrpIf2Entry 3 }

    snVrrpIf2RxAuthTypeErrCnts OBJECT-TYPE
         SYNTAX   Counter
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The received authentication type error counts in this interface."
         ::= { snVrrpIf2Entry 4 }

    snVrrpIf2RxAuthPwdMismatchErrCnts OBJECT-TYPE
         SYNTAX   Counter
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The received authentication password mismatched error counts in this interface."
         ::= { snVrrpIf2Entry 5 }

    snVrrpIf2RxVridErrCnts OBJECT-TYPE
         SYNTAX   Counter
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The received unfound VRID error counts in this interface."
         ::= { snVrrpIf2Entry 6 }

--  Section 4: VRRP virtual Router Configuration Table.

--      The VRRP (Virtual Router Redundancy Protocol) Virtual Router Table augments 
--		with VRRP specific information.
--      The following table is deprecated by snVrrpVirRtr2Table, which is 
--      ifIndex based table 

snVrrpVirRtrTable OBJECT-TYPE
    SYNTAX   SEQUENCE OF SnVrrpVirRtrEntry
    ACCESS   not-accessible
    STATUS   deprecated
    DESCRIPTION
       "The VRRP virtual router Entry describes one virtual router from
        the viewpoint of VRRP."
    ::= { snVrrpVirRtr 1 }

     snVrrpVirRtrEntry OBJECT-TYPE
         SYNTAX   SnVrrpVirRtrEntry
         ACCESS   not-accessible
         STATUS   deprecated
         DESCRIPTION
            "The VRRP virtual router Entry describes one virtual router from
            the viewpoint of VRRP."
         INDEX { snVrrpVirRtrPort, snVrrpVirRtrId }
         ::= { snVrrpVirRtrTable 1 }

     SnVrrpVirRtrEntry ::=
         SEQUENCE {
             snVrrpVirRtrPort
			     INTEGER,
             snVrrpVirRtrId
			     INTEGER,
             snVrrpVirRtrOwnership
			     INTEGER,
             snVrrpVirRtrCfgPriority
                 INTEGER,
             snVrrpVirRtrTrackPriority
                 INTEGER,
             snVrrpVirRtrCurrPriority
                 INTEGER,
			 snVrrpVirRtrHelloInt 
				 INTEGER,
			 snVrrpVirRtrDeadInt 
				 INTEGER,
			 snVrrpVirRtrPreemptMode 
				 INTEGER,
			 snVrrpVirRtrState
				 INTEGER,
			 snVrrpVirRtrActivate 
				 INTEGER,
             snVrrpVirRtrIpAddrMask
                 OCTET STRING,
             snVrrpVirRtrTrackPortMask
                 OCTET STRING,
             snVrrpVirRtrTrackVifMask
                 OCTET STRING,
			 snVrrpVirRtrRowStatus 
				 INTEGER,
			 snVrrpVirRtrRxArpPktDropCnts 
				 Counter,
			 snVrrpVirRtrRxIpPktDropCnts 
				 Counter,
			 snVrrpVirRtrRxPortMismatchCnts 
				 Counter,
			 snVrrpVirRtrRxNumOfIpMismatchCnts 
				 Counter,
			 snVrrpVirRtrRxIpMismatchCnts 
				 Counter,
			 snVrrpVirRtrRxHelloIntMismatchCnts 
				 Counter,
			 snVrrpVirRtrRxPriorityZeroFromMasterCnts 
				 Counter,
			 snVrrpVirRtrRxHigherPriorityCnts 
				 Counter,
			 snVrrpVirRtrTransToMasterStateCnts 
				 Counter,
			 snVrrpVirRtrTransToBackupStateCnts 
				 Counter,
			 snVrrpVirRtrCurrDeadInt 
				 INTEGER,
             snVrrpVirRtrTrackPortList
                 OCTET STRING,
             snVrrpVirRtrTrackVifPortList
                 OCTET STRING
         }


    snVrrpVirRtrPort OBJECT-TYPE
         SYNTAX   INTEGER
         ACCESS   read-only
         STATUS   deprecated
         DESCRIPTION
            "The IP port of this VRRP interface."
         ::= { snVrrpVirRtrEntry 1 }

    snVrrpVirRtrId OBJECT-TYPE
         SYNTAX   INTEGER (1..255)
         ACCESS   read-only
         STATUS   deprecated
         DESCRIPTION
            "One of the virtual router ID of this VRRP interface."
         ::= { snVrrpVirRtrEntry 2 }

    snVrrpVirRtrOwnership OBJECT-TYPE
	     SYNTAX   INTEGER {
					incomplete(0),
					owner(1),
					backup(2)
					}
         ACCESS   read-write
         STATUS   deprecated
         DESCRIPTION
            "The ownership of this VRRP router interface 
            can be set either owner(1) or backup(2).  
            VirRtr SNMP-GET returns incomplete(0), it means 
            no IP address has assigned to this VRRP router interface."
         ::= { snVrrpVirRtrEntry 3 }

     snVrrpVirRtrCfgPriority OBJECT-TYPE
         SYNTAX   INTEGER (3..254)
         ACCESS   read-write
         STATUS   deprecated
         DESCRIPTION
            "The higher the number the higher the priority is.
            This parameter decides which backup router should becomes
            the Active Router for the interface.  A backup Router with
            higher priority selected to becomes the Active Router.
            Therefore, this Object can be set if only if snVrrpVirRtrOwnership
            is set to backup(2)."
         DEFVAL { 100 }
         ::= { snVrrpVirRtrEntry 4 }

     snVrrpVirRtrTrackPriority OBJECT-TYPE
         SYNTAX   INTEGER (1..254)
         ACCESS   read-write
         STATUS   deprecated
         DESCRIPTION
            "The higher the number the higher the priority is.
            after this object is configured, the snVrrpVirRtrCurrPriority 
            of this interface will be adjusted dynamically with this
			track priority when the Track Port states first
            changes from UP to DOWN."
         ::= { snVrrpVirRtrEntry 5 }

     snVrrpVirRtrCurrPriority OBJECT-TYPE
         SYNTAX   INTEGER (1..254)
         ACCESS   read-only
         STATUS   deprecated
         DESCRIPTION
            "The higher the number the higher the priority is.
            This object will be adjusted dynamically with the
			track priority when the Track Port states first
            changes from UP to DOWN."
         ::= { snVrrpVirRtrEntry 6 }

     snVrrpVirRtrHelloInt OBJECT-TYPE
         SYNTAX   INTEGER (1..84)
         ACCESS   read-write
         STATUS   deprecated
         DESCRIPTION
            "Time interval between advertisements (seconds)."
         DEFVAL { 1 }
         ::= { snVrrpVirRtrEntry 7 }

     snVrrpVirRtrDeadInt OBJECT-TYPE
         SYNTAX   INTEGER (1..84)
         ACCESS   read-write
         STATUS   deprecated
         DESCRIPTION
            "Dead interval (seconds)."
         DEFVAL { 1 }
         ::= { snVrrpVirRtrEntry 8 }

     snVrrpVirRtrPreemptMode OBJECT-TYPE
         SYNTAX   INTEGER { disabled(0), enabled(1) }
         ACCESS   read-write
         STATUS   deprecated
         DESCRIPTION
            "This mode controls whether a higher priority Backup router
            preempts a lower priority Master.  The mode with enabled(1)
            allow preemption and disabled(0) prohibit preemption."
         DEFVAL { enabled }
         ::= { snVrrpVirRtrEntry 9 }

	 snVrrpVirRtrState OBJECT-TYPE
	     SYNTAX   INTEGER {
					init(0),
					master(1),
					backup(2)
				  }
         ACCESS   read-only
         STATUS   deprecated
         DESCRIPTION
            "This object specifies the VRRP Router's interface state as:
            init(0)...initialization state.
            master(1)...master state.
            backup(2)...backup state."
         ::= { snVrrpVirRtrEntry 10 }

	 snVrrpVirRtrActivate OBJECT-TYPE
	     SYNTAX   INTEGER {
					disabled(0),
					enabled(1)
				  }
         ACCESS   read-write
         STATUS   deprecated
         DESCRIPTION
            "This object specifies the VRRP Router's activate command as:
            disabled(0)...deactivate this VRRP Router.
            enabled(1)....activate this VRRP Router."
         ::= { snVrrpVirRtrEntry 11 }

    snVrrpVirRtrIpAddrMask OBJECT-TYPE
		 SYNTAX  OCTET STRING (SIZE(64))
         ACCESS   read-write
         STATUS   deprecated
         DESCRIPTION
            "The numbers of IP Addresses of this virtual router of this interface."
         ::= { snVrrpVirRtrEntry 12 }

     snVrrpVirRtrTrackPortMask OBJECT-TYPE
		 SYNTAX  OCTET STRING (SIZE(4..32))
         ACCESS   read-write
         STATUS   deprecated
         DESCRIPTION
            "This object specifies the identity of the physical port
			whose state is to be monitored.  Each bit is a port of
			the system. Default value is 0.  VirRtr this object is configured
			then the Preference Level of this interface will be adjusted
			dynamically depending on the state of the Track Port.
            The interface's Preference Level is reduced by value of 
            Preference Level parameter when the Track Port states first
            changes from UP to DOWN.  When the Track Port next comes up
            the interface's Preference Level is increased by the amount
            specified by the Preference Level.
            The Chassis/Stackable router VRRP Track port membership.
            The size of the OCTET STRING for Chassis is 32.
            The size of the OCTET STRING for Stackable is 4.
            (It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackPortList)"
         ::= { snVrrpVirRtrEntry 13 }

     snVrrpVirRtrTrackVifMask OBJECT-TYPE
		 SYNTAX  OCTET STRING (SIZE(4..512))
         ACCESS   read-write
         STATUS   deprecated
         DESCRIPTION
            "This object specifies the identity of the virtual interface 
            whose state is to be monitored.  Each bit is a port of
			the system. Default value is 0.  VirRtr this object is configured
			then the Preference Level of this interface will be adjusted
			dynamically depending on the state of the Track Port.
            The interface's Preference Level is reduced by value of 
            Preference Level parameter when the Track Port states first
            changes from UP to DOWN.  When the Track Port next comes up
            the interface's Preference Level is increased by the amount
            specified by the Preference Level.
            The Chassis/Stackable router VRRP Track port membership
            The size of the OCTET STRING for Chassis is 8.
            The size of the OCTET STRING for Stackable is 4.
            (It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackVifPortList)"
         ::= { snVrrpVirRtrEntry 14 }

     snVrrpVirRtrRowStatus OBJECT-TYPE
	     SYNTAX   INTEGER {
					invalid(1),
					valid(2),
					delete(3),
					create(4),
					modify(5)
				  }
		 ACCESS   read-write
	     STATUS   deprecated
		 DESCRIPTION
		 	"This object is used to create and
		     delete row in the table and control
			 if they are used. The values
		     that can be written are:
		     delete(3)...deletes the row
		     create(4)...creates a new row
		     modify(5)...modifies an existing row

		     VirRtr the row exists, then a SET with
		     value of create(4) returns error
		     'badValue'. Deleted rows go away
		     immediately. The following values
		     can be returned on reads:
		     noSuch(0)...no such row
		     invalid(1)...Setting it to 'invalid' has the effect of
                          rendering it inoperative..
		     valid(2)....the row exists and is valid"
	     ::= { snVrrpVirRtrEntry 15 }

	 snVrrpVirRtrRxArpPktDropCnts OBJECT-TYPE
	     SYNTAX   Counter
         ACCESS   read-only
         STATUS   deprecated
         DESCRIPTION
            "The received VRRP ARP Packet Drop Counts."
         ::= { snVrrpVirRtrEntry 16 }

	 snVrrpVirRtrRxIpPktDropCnts OBJECT-TYPE
	     SYNTAX   Counter
         ACCESS   read-only
         STATUS   deprecated
         DESCRIPTION
            "The received VRRP IP Packet Drop Counts."
         ::= { snVrrpVirRtrEntry 17 }

	 snVrrpVirRtrRxPortMismatchCnts OBJECT-TYPE
	     SYNTAX   Counter
         ACCESS   read-only
         STATUS   deprecated
         DESCRIPTION
            "The received VRRP Port mismatching Counts."
         ::= { snVrrpVirRtrEntry 18 }

	 snVrrpVirRtrRxNumOfIpMismatchCnts OBJECT-TYPE
	     SYNTAX   Counter
         ACCESS   read-only
         STATUS   deprecated
         DESCRIPTION
            "The received VRRP Number of IP Addresses mismatching Counts."
         ::= { snVrrpVirRtrEntry 19 }

	 snVrrpVirRtrRxIpMismatchCnts OBJECT-TYPE
	     SYNTAX   Counter
         ACCESS   read-only
         STATUS   deprecated
         DESCRIPTION
            "The received VRRP IP Address mismatching Counts."
         ::= { snVrrpVirRtrEntry 20 }

	 snVrrpVirRtrRxHelloIntMismatchCnts OBJECT-TYPE
	     SYNTAX   Counter
         ACCESS   read-only
         STATUS   deprecated
         DESCRIPTION
  			"The counts of the virtual router interface with hello interval mismatch counts."
         ::= { snVrrpVirRtrEntry 21 }

	 snVrrpVirRtrRxPriorityZeroFromMasterCnts OBJECT-TYPE
	     SYNTAX   Counter
         ACCESS   read-only
         STATUS   deprecated
         DESCRIPTION
  			"The counts of the virtual router interface with Priority zero from the master."
         ::= { snVrrpVirRtrEntry 22 }

	 snVrrpVirRtrRxHigherPriorityCnts OBJECT-TYPE
	     SYNTAX   Counter
         ACCESS   read-only
         STATUS   deprecated
         DESCRIPTION
  			"The counts of the virtual router interface with higher Priority."
         ::= { snVrrpVirRtrEntry 23 }

	 snVrrpVirRtrTransToMasterStateCnts OBJECT-TYPE
	     SYNTAX   Counter
         ACCESS   read-only
         STATUS   deprecated
         DESCRIPTION
  			"The counts of the virtual router interface transition to master state."
         ::= { snVrrpVirRtrEntry 24 }

	 snVrrpVirRtrTransToBackupStateCnts OBJECT-TYPE
	     SYNTAX   Counter
         ACCESS   read-only
         STATUS   deprecated
         DESCRIPTION
  			"The counts of the virtual router interface transition to backup state."
         ::= { snVrrpVirRtrEntry 25 }

     snVrrpVirRtrCurrDeadInt OBJECT-TYPE
         SYNTAX   INTEGER 
         ACCESS   read-only
         STATUS   deprecated
         DESCRIPTION
            "Current Dead interval (in 100 milliseconds)."
         ::= { snVrrpVirRtrEntry 26 }

     snVrrpVirRtrTrackPortList OBJECT-TYPE
		 SYNTAX  OCTET STRING
         ACCESS   read-write
         STATUS   deprecated
         DESCRIPTION
            "This object specifies the identity of the physical port
			whose state is to be monitored.  Each port index is a
			16-bit integer in big endian order. 8-bit is the slot
			number, the other 8-bit is the port number. Default value
			is 0 length octet string.  If this object is configured
			then the Preference Level of this interface will be adjusted
			dynamically depending on the state of the Track Port.
            The interface's Preference Level is reduced by value of 
            Preference Level parameter when the Track Port states first
            changes from UP to DOWN.  When the Track Port next comes up
            the interface's Preference Level is increased by the amount
            specified by the Preference Level.
            The router VRRP physical track port membership."
         ::= { snVrrpVirRtrEntry 27 }

     snVrrpVirRtrTrackVifPortList OBJECT-TYPE
		 SYNTAX  OCTET STRING
         ACCESS   read-write
         STATUS   deprecated
         DESCRIPTION
            "This object specifies the identity of the virtual interface 
            whose state is to be monitored.  Each port index is a
			16-bit integer in big endian order.  Default value
			is 0 length octet string.  If this object is configured
			then the Preference Level of this interface will be adjusted
			dynamically depending on the state of the Track Port.
            The interface's Preference Level is reduced by value of 
            Preference Level parameter when the Track Port states first
            changes from UP to DOWN.  When the Track Port next comes up
            the interface's Preference Level is increased by the amount
            specified by the Preference Level.
            The router VRRP virtual port track membership."
         ::= { snVrrpVirRtrEntry 28 }


--  Section 5: VRRP and VRRPE Virtual Router Configuration Table,  ifIndex based

--      The VRRP(Virtual Router Redundancy Protocol, rfc 2338 based, made an 
--      enhancement!) and VRRPE (Virtual Router Redundancy Protocol hp extended)
--      configuration.
--      Added snVrrpVirRtr2CurrDeadInt, snVrrpVirRtr2AdvertiseBackup, SnVrrpVirRtr2VirtualMacAddr
--      SnVrrpVirRtr2IpAddrCount, SnVrrpVirRtr2MasterIpAddr as new objects
--      and deleted port masks objects and virtual interface track port list.

snVrrpVirRtr2Table OBJECT-TYPE
    SYNTAX   SEQUENCE OF SnVrrpVirRtr2Entry
    ACCESS   not-accessible
    STATUS   mandatory
    DESCRIPTION
       "The Vrrp and Vrrpe virtual router Entry describes one virtual router from
        the viewpoint of Vrrp and Vrrpe."
    ::= { snVrrpVirRtr2 1 }

     snVrrpVirRtr2Entry OBJECT-TYPE
         SYNTAX   SnVrrpVirRtr2Entry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "The Vrrp and Vrrpe virtual router Entry describes one virtual router from
            the viewpoint of Vrrp and Vrrpe."
         INDEX { ifIndex, snVrrpVirRtr2Id }
         ::= { snVrrpVirRtr2Table 1 }

     SnVrrpVirRtr2Entry ::=
         SEQUENCE {
             snVrrpVirRtr2Id
			     INTEGER,
             snVrrpVirRtr2Ownership
			     INTEGER,
             snVrrpVirRtr2CfgPriority
                 INTEGER,
             snVrrpVirRtr2TrackPriority
                 INTEGER,
             snVrrpVirRtr2CurrPriority
                 INTEGER,
			 snVrrpVirRtr2HelloInt 
				 INTEGER,
			 snVrrpVirRtr2DeadInt 
				 INTEGER,
			 snVrrpVirRtr2PreemptMode 
				 INTEGER,
			 snVrrpVirRtr2State
				 INTEGER,
             snVrrpVirRtr2IpAddrMask
                 OCTET STRING,
			 snVrrpVirRtr2Activate 
				 INTEGER,
			 snVrrpVirRtr2BackupInt
				 INTEGER,
			 snVrrpVirRtr2RowStatus 
				 INTEGER,
			 snVrrpVirRtr2RxArpPktDropCnts 
				 Counter,
			 snVrrpVirRtr2RxIpPktDropCnts 
				 Counter,
			 snVrrpVirRtr2RxPortMismatchCnts 
				 Counter,
			 snVrrpVirRtr2RxNumOfIpMismatchCnts 
				 Counter,
			 snVrrpVirRtr2RxIpMismatchCnts 
				 Counter,
			 snVrrpVirRtr2RxHelloIntMismatchCnts 
				 Counter,
			 snVrrpVirRtr2RxPriorityZeroFromMasterCnts 
				 Counter,
			 snVrrpVirRtr2RxHigherPriorityCnts 
				 Counter,
			 snVrrpVirRtr2TransToMasterStateCnts 
				 Counter,
			 snVrrpVirRtr2TransToBackupStateCnts 
				 Counter,
			 snVrrpVirRtr2CurrDeadInt 
				 INTEGER,
             snVrrpVirRtr2TrackPortList
                 OCTET STRING,
			 snVrrpVirRtr2AdvertiseBackup 
				 INTEGER,
             snVrrpVirRtr2MasterIpAddr
                 IpAddress,
             snVrrpVirRtr2IpAddrCount
                 INTEGER,
             snVrrpVirRtr2VirtualMacAddr
                 MacAddress
         }
     
    snVrrpVirRtr2Id OBJECT-TYPE
         SYNTAX   INTEGER (1..255)
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "One of the virtual router ID of this Vrrp and Vrrpe interface."
         ::= { snVrrpVirRtr2Entry 1 }

    snVrrpVirRtr2Ownership OBJECT-TYPE
	     SYNTAX   INTEGER {
					incomplete(0),
					owner(1),
					backup(2)
					}
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The ownership of this Vrrp router interface 
            can be set either owner(1) or backup(2).  
            VirRtr SNMP-GET returns incomplete(0), it means 
            no IP address has assigned to this Vrrp router interface.
            vrrpe protocol has no owner(1), can only be set to backup(2) or incomplete(0)."
         ::= { snVrrpVirRtr2Entry 2 }

     snVrrpVirRtr2CfgPriority OBJECT-TYPE
         SYNTAX   INTEGER (0..255)
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
         "This object specifies the priority to be used for the
         virtual router master election process. Higher values imply
         higher priority.

         A priority of '0', although not settable, is sent by
         the master router to indicate that this router has ceased
         to participate in VRRP and a backup virtual router should
         transition  to become a new master.

         A priority of 255 is only for VRRP - owner. Not valid for number to 
         configure VRRPE."
         DEFVAL { 100 }
         ::= { snVrrpVirRtr2Entry 3 }

     snVrrpVirRtr2TrackPriority OBJECT-TYPE
         SYNTAX   INTEGER (1..254)
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The higher the number the higher the priority is.
            after this object is configured, the snVrrpVirRtr2CurrPriority 
            of this interface will be adjusted dynamically with this
			track priority when the Track Port states first
            changes from UP to DOWN."
         ::= { snVrrpVirRtr2Entry 4 }

     snVrrpVirRtr2CurrPriority OBJECT-TYPE
         SYNTAX   INTEGER (1..254)
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The higher the number the higher the priority is.
            This object will be adjusted dynamically with the
			track priority when the Track Port states first
            changes from UP to DOWN."
         ::= { snVrrpVirRtr2Entry 5 }

     snVrrpVirRtr2HelloInt OBJECT-TYPE
         SYNTAX   INTEGER (1..84)
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "Time interval between advertisements (seconds)."
         DEFVAL { 1 }
         ::= { snVrrpVirRtr2Entry 6 }

     snVrrpVirRtr2DeadInt OBJECT-TYPE
         SYNTAX   INTEGER (0..84)
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "Dead interval (seconds)."
         DEFVAL { 1 }
         ::= { snVrrpVirRtr2Entry 7 }

     snVrrpVirRtr2PreemptMode OBJECT-TYPE
         SYNTAX   INTEGER { disabled(0), enabled(1) }
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "This mode controls whether a higher priority Backup router
            preempts a lower priority Master.  The mode with enabled(1)
            allow preemption and disabled(0) prohibit preemption."
         DEFVAL { enabled }
         ::= { snVrrpVirRtr2Entry 8 }

	 snVrrpVirRtr2State OBJECT-TYPE
	     SYNTAX   INTEGER {
					init(0),
					master(1),
					backup(2)
				  }
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "This object specifies the Vrrp and vrrpe Router's interface state as:
            init(0)...initialization state.
            master(1)...master state.
            backup(2)...backup state."
         ::= { snVrrpVirRtr2Entry 9}

    snVrrpVirRtr2IpAddrMask OBJECT-TYPE
		 SYNTAX  OCTET STRING (SIZE(64))
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "The numbers of IP Addresses of this virtual router of this interface."
         ::= { snVrrpVirRtr2Entry 10 }

	 snVrrpVirRtr2Activate OBJECT-TYPE
	     SYNTAX   INTEGER {
					disabled(0),
					enabled(1)
				  }
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "This object specifies the Vrrp Router's activate command as:
            disabled(0)...deactivate this Vrrp and Vrrpe Routers.
            enabled(1)....activate this Vrrp and Vrrpe Routers."
         ::= { snVrrpVirRtr2Entry 11 }

     snVrrpVirRtr2BackupInt OBJECT-TYPE
         SYNTAX   INTEGER (60..3600)
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "Time interval between backup routers hello message advertisements (seconds)."
         DEFVAL { 60 }
         ::= { snVrrpVirRtr2Entry 12 }

    snVrrpVirRtr2RowStatus OBJECT-TYPE
	     SYNTAX   INTEGER {
					invalid(1),
					valid(2),
					delete(3),
					create(4),
					modify(5)
				  }
		 ACCESS   read-write
	     STATUS   mandatory
		 DESCRIPTION
		 	"This object is used to create and
		     delete row in the table and control
			 if they are used. The values
		     that can be written are:
		     delete(3)...deletes the row
		     create(4)...creates a new row
		     modify(5)...modifies an existing row

		     VirRtr the row exists, then a SET with
		     value of create(4) returns error
		     'badValue'. Deleted rows go away
		     immediately. The following values
		     can be returned on reads:
		     noSuch(0)...no such row
		     invalid(1)...Setting it to 'invalid' has the effect of
                          rendering it inoperative..
		     valid(2)....the row exists and is valid"
	     ::= { snVrrpVirRtr2Entry 13 }

	 snVrrpVirRtr2RxArpPktDropCnts OBJECT-TYPE
	     SYNTAX   Counter
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The received Vrrp and Vrrpe ARP Packet Drop Counts."
         ::= { snVrrpVirRtr2Entry 14 }

	 snVrrpVirRtr2RxIpPktDropCnts OBJECT-TYPE
	     SYNTAX   Counter
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The received Vrrp and Vrrpe IP Packet Drop Counts."
         ::= { snVrrpVirRtr2Entry 15 }

	 snVrrpVirRtr2RxPortMismatchCnts OBJECT-TYPE
	     SYNTAX   Counter
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The received Vrrp and Vrrpe Port mismatching Counts."
         ::= { snVrrpVirRtr2Entry 16 }

	 snVrrpVirRtr2RxNumOfIpMismatchCnts OBJECT-TYPE
	     SYNTAX   Counter
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The received Vrrp and Vrrpe Number of IP Addresses mismatching Counts."
         ::= { snVrrpVirRtr2Entry 17 }

	 snVrrpVirRtr2RxIpMismatchCnts OBJECT-TYPE
	     SYNTAX   Counter
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "The received Vrrp and Vrrpe IP Address mismatching Counts."
         ::= { snVrrpVirRtr2Entry 18 }

	 snVrrpVirRtr2RxHelloIntMismatchCnts OBJECT-TYPE
	     SYNTAX   Counter
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
  			"The counts of the virtual router interface with hello interval mismatch counts."
         ::= { snVrrpVirRtr2Entry 19 }

	 snVrrpVirRtr2RxPriorityZeroFromMasterCnts OBJECT-TYPE
	     SYNTAX   Counter
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
  			"The counts of the virtual router interface with Priority zero from the master."
         ::= { snVrrpVirRtr2Entry 20 }

	 snVrrpVirRtr2RxHigherPriorityCnts OBJECT-TYPE
	     SYNTAX   Counter
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
  			"The counts of the virtual router interface with higher Priority."
         ::= { snVrrpVirRtr2Entry 21 }

	 snVrrpVirRtr2TransToMasterStateCnts OBJECT-TYPE
	     SYNTAX   Counter
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
  			"The counts of the virtual router interface transition to master state."
         ::= { snVrrpVirRtr2Entry 22 }

	 snVrrpVirRtr2TransToBackupStateCnts OBJECT-TYPE
	     SYNTAX   Counter
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
  			"The counts of the virtual router interface transition to backup state."
         ::= { snVrrpVirRtr2Entry 23 }

     snVrrpVirRtr2CurrDeadInt OBJECT-TYPE
         SYNTAX   INTEGER 
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
            "Current Dead interval (in 100 milliseconds)."
         ::= { snVrrpVirRtr2Entry 24 }

     snVrrpVirRtr2TrackPortList OBJECT-TYPE
		 SYNTAX  OCTET STRING
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "This object specifies the identity of the physical port and virtual ports
			whose state is to be monitored.  Each port index is 
			an ifIndex, if there are consecutive 4 or more ifIndex then
			they will be encoded like below. 
            Encoding and decoding scheme is range based:
            Each range prefix with 0000 (2 octets) where 0000 is not valid 
            ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2 
            octets of higher range ifIndex. Individual(non range) ones will be displayed as it is.
            Ex:
            port list: 0001..0005 0015 0032..0047
            Port list in PDU:  0000 0001 0005 000f 0000 0020 002f.
			If this object is configured
			then the Preference Level of this interface will be adjusted
			dynamically depending on the state of the Track Port.
            The interface's Preference Level is reduced by value of 
            Preference Level parameter when the Track Port states first
            changes from UP to DOWN.  When the Track Port next comes up
            the interface's Preference Level is increased by the amount
            specified by the Preference Level.
            The router VRRP and VRRP-E physical track port membership."
         ::= { snVrrpVirRtr2Entry 25 }

     snVrrpVirRtr2AdvertiseBackup OBJECT-TYPE
         SYNTAX   INTEGER { disabled(0), enabled(1) }
         ACCESS   read-write
         STATUS   mandatory
         DESCRIPTION
            "Set Advertise this backup router to master "
         DEFVAL { disabled }
         ::= { snVrrpVirRtr2Entry 26 }

     snVrrpVirRtr2MasterIpAddr OBJECT-TYPE
         SYNTAX       IpAddress
         ACCESS       read-only
         STATUS       mandatory
         DESCRIPTION
             "The master router's real/virtual (primary) IP address. This is
             the IP address listed as the source in VRRP and VRRPE advertisement
             last received by this virtual router."
         ::= { snVrrpVirRtr2Entry 27 }

     snVrrpVirRtr2IpAddrCount OBJECT-TYPE
         SYNTAX       INTEGER (0..255)
         ACCESS       read-only
         STATUS       mandatory
         DESCRIPTION
             "The number of IP addresses that are associated with this
             virtual router. This number is equal to the number of rows
             in the vrrpAssoIpAddrTable that correspond to a given IF
             index/VRID pair."
         ::= { snVrrpVirRtr2Entry 28 }

     snVrrpVirRtr2VirtualMacAddr OBJECT-TYPE
         SYNTAX       MacAddress
         ACCESS       read-only
         STATUS       mandatory
         DESCRIPTION
             "The virtual MAC address of the virtual router. Although this
             object can be derived from the 'snVrrpVirRtr2VrId' object, it is
             defined so that it is easily obtainable by a management
             application and can be included in VRRP-related SNMP traps."
         ::= { snVrrpVirRtr2Entry 29 }

END	  
